Re: Mlt166a Megmeet ltc2701td
Budm, The SCH did the trick, I had it powered up in an hour. Z3 and the two 10 ohm surface mount resistors were the problem.
Thanks
Bigbe
New Member
Last Activity: 02-05-2014, 07:33 PM
Joined: 11-01-2013
Location: osceola mills, pa
-
Re: Mlt166a Megmeet ltc2701td
I'll have to get the camera out and take some snaps. give me a bit to do that, might be tomorrow.
ThanksLeave a comment:
-
Re: Mlt166a Megmeet ltc2701td
Well Budm, The TV won't turn on just blinks red. The 5v jumps around from 4.4 to 4.9 very unstable. when connecting the 5v to the pson pin nothing happens with the 12v or 24v pins. I've changed the common caps that go bad.Leave a comment:
-
Mlt166a Megmeet ltc2701td
I have an mlt166a that shows a hot ground. 86 volts at the heatsinks on the primary side. Some of the capacitors tops show the same voltage as the heatsinks. what should I look for to try fixing this one.
Thanks, Bigbe -
Re: need help to test inverter transformer
It worked for me too.Leave a comment:
No activity results to display
Leave a comment: