Re: Magnavox 42MF237S/37 No Picture/Sound/Menu
Should the Vs and Va be at the amount on the label with the black cables going to the input board connected or disconnected with the Y and Z boards as well? Should I return the PSU or get a input board?
nWoJester
Member
Last Activity: 05-06-2020, 05:32 PM
Joined: 11-01-2013
Location: Woodstock
-
Re: Magnavox 42MF237S/37 No Picture/Sound/Menu
I've done that and still nothing. I had someone do some testing and the only voltage readings I get come from the black wires going to the input board. Which are 12v and 5v from the respectively marked areas on the connector.Leave a comment:
-
Re: Magnavox 42MF237S/37 No Picture/Sound/Menu
I used the SDM feature and the front led blinked 4, 6, 4, 6, 1.Leave a comment:
-
Re: Magnavox 42MF237S/37 No Picture/Sound/Menu
After digging around to figure out the process. I get no readings on the dmm. I set it to 1000v DCV and tested from the connectors on the psu. I'm guessing the psu is bad? I even tried from the test locations. I also tested all 4 fuses and they have 1.2 readings.Leave a comment:
-
Re: Magnavox 42MF237S/37 No Picture/Sound/Menu
I unplugged the power. I took off the metal tray hiding the logic board by removing the 4 screws and some misc cables that were to short going to the power board. I disconnected the LVDS cable from the logic board. I placed a HDD jumper on the bottom two pins labeled 3-4. Plugged the misc cables back into the power board. Plugged the power cable back in and everything powered up the same as before with the same no picture, no sound and no menu/HUD of the tv. I can redo it and take a picture if that is what you where asking for really....Leave a comment:
-
Re: Magnavox 42MF237S/37 No Picture/Sound/Menu
I even unplugged the LVDS cable from the In on the converter board instead of the out, but it turns off after 15 secs instead.Leave a comment:
-
Re: Magnavox 42MF237S/37 No Picture/Sound/Menu
Still the same.Leave a comment:
-
Re: Magnavox 42MF237S/37 No Picture/Sound/Menu
Yes. So is the y, y buffer, z and power supply boardsLeave a comment:
-
Magnavox 42MF237S/37 No Picture/Sound/Menu
The plasma originally had the following issue:
Attempt to power up, 2 clicks, powers off and red led blinked 6 times.
After replacing the power board, it now powers up with a blue solid led on the front, solid green led on the power board, and 2 solid green led's on the output board. It responds to the remote since the front blue led blinks with every button press. The side panel works that I know of since I can press the power button on it and it powers off/on. There is no sound, picture or even the menu/HUD of the tv displaying.
I've attempted to use the... -
Re: New Members - please post your introductions here
What's up members of BadCaps! Just getting into TV repair due to a free 42" plasma I was able to obtain. Hope this site helps.Leave a comment:
No activity results to display
Leave a comment: