Re: TC-P42S1 11 red blinking led help!!
Ordering fans soon. Anything ,like a tool, voltmeter etc I should order while I'm shipping? Have screwdriver and that is about it. What about something like the thing u can check if something is hot or not? A light goes off.What about something to replace the clips? But , theoretically the fans will do that , correct? Having the back off the tv and revealing what goes into a pretty picture is intriguing.
kauaidog
Member
Last Activity: 12-07-2013, 06:16 PM
Joined: 10-28-2013
Location: kapaa.hawaii
-
Re: TC-P42S1 11 red blinking led help!!
Scratching my head.What would that look like?Leave a comment:
-
Re: TC-P42S1 11 red blinking led help!!
.No, I have them both disconnected and jumped with a working tv with no back on it to keep the tv cool...Leave a comment:
-
Re: TC-P42S1 11 red blinking led help!!
If I leave them jumped then should i find a metal wire or something that is better at conducting power than the clips?Leave a comment:
-
Re: TC-P42S1 11 red blinking led help!!
I just don't remember ever hearing the fans and I am in a fairly small space. But ur saying seeing if I can power the fans before I remove them? Makes sense. I have no problem with paper clips. Got em in pretty good. What is an OEM? Thanks for the links, very helpful.Last edited by kauaidog; 11-04-2013, 02:11 AM.Leave a comment:
-
Re: TC-P42S1 11 red blinking led help!!
Decided to use paper clip. Did as instructed and tested one fan with a no result then the second fan ,B, then on remebering neither fan was going when i opened it up i paperclipped both fans and the tv works!!! pic enclosed with blue paper clip showing and one on B. Question. Is this just a work around? no kids so leaving back off till i find out what is next. I am assuming I need to replace both fans? The purpose of the fan is keeping inside air cooled? The tv is in breezy spot (no AC). Can i keep these paper clipped for a while or what?...Leave a comment:
-
Re: TC-P42S1 11 red blinking led help!!
Now that is more my speed
. heading to hardware store today....Leave a comment:
-
Re: TC-P42S1 11 red blinking led help!!
more. i have disconnected one fan as shown and then the black red and yellow wires run to green board. checked out service manual - now i can go to it when u say something i don't understand. like different boards, saw the schem on removing fan. just need a wire for jumping. hope these pics are ok yes , the lines run into the A board....Last edited by kauaidog; 11-02-2013, 06:54 PM.Leave a comment:
-
Re: TC-P42S1 11 red blinking led help!!
Better? I am guessing the green board in lower right is the A board. Agin no burns of any kind. I'm kind of dead in the water till i get a jumper wire. Is that what i ask for at the harrdware store? went to one and no luck. Sorry to be so dense I hope u don't get anyone more challenged than myself.
thanks again...Leave a comment:
-
Re: TC-P42S1 11 red blinking led help!!
ok about this jumper . just any old wire? all my stores are closed at moment but it looks like any skinny wire might do?...Last edited by kauaidog; 11-02-2013, 05:50 PM.Leave a comment:
-
-
TC-P42S1 11 red blinking led help!!
I have aTC-42S1 I bought new in 2/10. Got 11 blinking lights about a 2 years into use. so about a year now i've been crossing my fingers and sometimes it comes right on and others it takes a time or two. Recently i was on vacation and unplugged tv from the wall. plugged back in when i came home and the tv gave me trouble by not coming on for quite a few tries then it would come on and go off after about 15 minutes. got it too work that night but the next morning all i could get was the tv power on(slight lighting up of screen )then a snap, then go off with 11 blod. Someone was kind enough to email... -
Re: New Members - please post your introductions here
Aloha, I live on the beautiful island of Kauai however we have no tv repairpersons , shops or anything and I have a broke down Panny. Did I mention I am severely technically challenged. Call me frustrated in Paradise!!Leave a comment:
No activity results to display
Leave a comment: