Re: LG 50ps3000

I also fixed this fault with a repair kit from eBay, and it worked fine for around two months, however the problem has re-appeared, with the same failed components (MOSFETS, power resistors etc - I ensured there was a proper coating of heatsink compound and screwed doen the MOSFETS tightly, and also replaced a number of small electrolytics on the control board that were supplied with the kit). I suspect there is an underlying cause (I did post something about this in another thread on here) any ideas folks?

Re: lg 50ps3000 red haze

I have repaired the zsus fault for a customer using a kit of MOSFETS and power resistors etc from ebay for around £18 (this kit also contained a number of electrolytics requiring replacement on the processor card). After this the TV worked perfectly for around two months, but the fault has re appeared, again with the same failed (dead short) MOSFETS on the zsus board. I used heatsink compound and ensured the devices were tightly bolted to the heatsinks, so I think there must be an underlying cause - any ideas anyone