Re: Are these voltage values look ok on Panasonic TV?




Thanks...model no. of TV is TH-58PE75U.
Board A in question part no. is TNPH0692(1)A

No there is no label on or near connector...
There is a label in metal box where this A board fits in ..and that no. is txfnz01lmtu as attached in picture.....also attached few more pics showing actual board those two connectors I am talking about ...they are A6 which has 12 pins and A7 which has 11 pins...also power supply board picture...

I have also uploaded page from Factory service...

TV model no. is TH-58PE75U ..it has no picture...few minutes after powering it on, the led starts blinking and it blinks for about 13 times ....I found Factory service manual and it says

Communication error with IC8001(Pesks lite 2)
and check board A and board part no. is TNPH0692ADS Or TNPH0692(1)A

So I checked voltage on two connectors from power supply to this A board just to verify if power supply is ok or not..

And here are the voltage I found..
Voltage on first connector

1st pin-15.73 V ,
2nd pin - 15.73 V ,...

Re: No picture on 58" plasma TV



OK...so you in indirectly saying replace the board...
Where... Can I buy a replacement?...

TV model no. is TH-58PE75U ..it has no picture...few minutes after powering it on, the led starts blinking and it blinks for about 13 times ....I found Factory service manual and it says

Communication error with IC8001(Pesks lite 2)
and check board A and board part no. is TNPH0692ADS Or TNPH0692(1)A

So I concluded that ...[B]we need to replace A board..[/B]..

....but..am not tech at all...I just read the manual and concluded that I should replace board......but before I buy the board and replace it...

I would like an advice on...

Re: New Members - please post your introductions here

Hi.thanks..for letting me in...I need some advice and discuss.