Re: Asus Cuv4x-d

I was amazed to find a sanyo but given its location and usage it is not a complete suprise. Most of the 16 are right next to the heat sinks of the cpu I imagine that A LOT of heat energy moves throught that area. Also they are tall, more surface area to absorb heat and located close together. All the sanyos were bad even those located away from the cpu's and other non-sanyo caps were fine( no bulging ).

Maybe the power supply could have been the problem I do not use it anymore because it is lower power and does not fit the newer MB's.
...

Re: VierwSonic VX922 and VX724 Bad CapXon

Here is the VX922 PS board. There is a cap c123 I do not know the value of....

I have two LCD monitors both flashing power led, no picture.

Both units have Bulging CapXon caps. I have decided to repait these myself but the vx724 looks to have some darkening( not burnt ) of the PS board around one of the the CCLs transformer and Q320(vx724). I am wondering if I should replace those too.

Anyone re-capped these PS boards and have a parts list? Some caps I cannot read because they are blocked and I know one is covered with a thermal shield of some sort.

Rob

I have this mother board and it always appeared to be sluggish from day one. I bought it new and it has worked very well with dual p3's until I started to receive XP BSOD's and linux kernel failures. These started off being random then it would not load the OS.

I have since replaced it with a newer MB but I have some older ISA cards for serial ports that I would like to continue to use since they still work. I used this box as a internet gateway and general pupose Linux server( DB, FAX, File Server, Router etc. ) .

Long story short the Sanyo 1500uf 6.3v WX series...