Re: Troubleshooting TVs...
wizard they are rectangle, blue and have SHINSHIN P1.0 (K)+-10% 630V on the top. from what i have read they are 1uf.
ironbot
New Member
Last Activity: 12-13-2008, 06:21 AM
Joined: 12-02-2008
Location:
-
Last edited by ironbot; 12-13-2008, 06:13 AM. -
Re: Troubleshooting TVs...
ok i ask again. anyone know where i can get these caps? SHINSHIN P1.0 (K)+-10% 630V 1 uF.....for Hyundai HPT4240 . the other cap i can get easy.Leave a comment:
-
Re: Troubleshooting TVs...
confirmed the cap with the prob
i isolated it (with the help of a cardboard tube) and the set worked.
Leave a comment:
-
Re: Troubleshooting TVs...
i have read that these are the most likely wizard. along with an electrolitic. (50v 10uf) i have read that this one goes open. so heating it wont fix that one i think.so maybe its these ones?Last edited by ironbot; 12-10-2008, 03:15 PM.Leave a comment:
-
Re: Troubleshooting TVs...
a follow up. i found having warmed the caps up. the set will work first time.
as normaly it will turn on then off. maybe bad electrolite?. i have read that sometimes caps loose there ability to opperate normaly when cold. or dried out. anyone confirm? thanksLeave a comment:
-
Re: Troubleshooting TVs...
i have a Hyundai HPT4240 plasma tv, and need advice on what type of caps i need for it. they are square and bluemaybe about an inch long and half as wide, i think they are polypropylene,they are marked..SHINSHIN P1.0 (K)+-10% 630V. they are in the power supply.also maybe where i may be able to buy them. thank you in advanceLeave a comment:
-
Re: Asrock K7S8X R3.0
thank you Scenic and ratdude747, i will try and source better ones. as long as the uf is ok. i was realy worried about the voltage. again thank you both.Leave a comment:
-
Re: Asrock K7S8X R3.0
i have a Asrock K7S8XE+/A/ASR. a had recent crashes BOD, i replaced the caps on it about a year ago after the same problems and things where ok. until now. the only caps i could get hold of are .. jamicon 16v 1000uf, the first time i replaced them with the direct same ( 6.3v 1000uf ). could any-one advise me if the jamicons will be ok? with the extra voltage, thank youLeave a comment:
No activity results to display
Leave a comment: