Announcement

Collapse
No announcement yet.

User Profile

Collapse

Profile Sidebar

Collapse
Avatar
gixxer55
New Member
Last Activity: 10-16-2013, 10:19 AM
Joined: 10-13-2013
Location: aliso viejo, ca.
  •  
  • Filter
  • Time
  • Show
  • Source
Clear All
new posts

  • Re: DAA75L-aParker mobo schematic-pin out

    Domas, I need the pinnout of the header at the top right of your board picture.(actually your picture does not show the header) where did you find that picture?? my board does not tell me what the pins are.
    thanks
    See more | Go to post

    Leave a comment:


  • Re: DAA75L-aParker mobo schematic-pin out

    actually it does have internal usb 3 output. but its under my video card and I cant plug in the big connector supplied by the new case. but don't worry bout that. I need the power header pinnout
    See more | Go to post

    Leave a comment:


  • Re: DAA75L-aParker mobo schematic-pin out

    ok guys, don't worry about the USB. I just need to know about the header pins and where the new case power/reset/hdd led/power led two pin connectors plug into.
    the case connector wires are marked so I know what those are but the board is not marked at the power pin headers. I just need to know what each set of 2 pins are. I know the outside pin is positive and the inside pin is negative. that is the why I need the manual for this board. thanks
    See more | Go to post

    Leave a comment:


  • Re: DAA75L-aParker mobo schematic-pin out

    the usb 3 connector on the board is blocked by my low profile 6670 video card. so they give you a converter to 2 and that connector on the board is not blocked. I don't need anymore usb 3 as I have two on the back and my new storage 2tb drive is internal. no need for an external.
    See more | Go to post

    Leave a comment:


  • DAA75L-aParker mobo schematic-pin out

    Good morning everyone. I'm a newbie.
    need some help on my DAA75L-aParker motherboard.
    just transferred everything to a new Lian Li case. its a really nice atx/matx case. kinda big but really laid out well. only issue is I don't know the pin outs on the board header. I found the power pins and reset so computer is running fine but no lights. I would like to know if anyone has the schematic or manual for this MOBO so I can hook all the case wires up. I looked on FTP but cannot find it. if anyone is interested, this is a really nice case. comes with three fans, 2 front usb 3.0, which...
    See more | Go to post

  • Re: New Members - please post your introductions here

    hey topcat. just wanted to say hello. I just Joined. thanks
    See more | Go to post

    Leave a comment:

No activity results to display
Show More
Working...
X