Re: Mag LT916s Model 900p 19" LCD dropping like flies

Hi! I picked an LT916s that was tossed out at work. Initially it was totally dead. I repaired it in two steps. First I replaced the 6 - 470uf caps and the 1-220uF one in the section of the board near the rectifiers. All of these were "puffed out". At that point it exhibited the symptoms of 2 seconds on followed by blanking. Oddly enough it would come back on for another 2 seconds each time the video card was switched to a different mode, not just after a powerup. Next I replaced the 2 - 100uf and the 2 - 10uf ones....