Re: Samsung UE32D5720 permanent reboot
Hi I have the same problem and came up with idea as I read the net that the NAND memory chip K9GAG08U0E is dead. Now you could buy it new but empty. It need to be programmed, it is not complicated process, but I don't have the programator. There are some chips to buy online in Polland.
[url]http://allegro.pl/samsung-bn41-01660b-bn41-01605a-nand-k9gag08u0e-i6440669992.html#thumb/3[/url]
This is just an idea, still haven't order one.Re: Samsung UE32D5720 permanent rebo...e same problem
branislav18
New Member
Last Activity: 04-06-2017, 02:54 AM
Joined: 09-06-2013
Location: Petrovec
-
Re: Samsung LE32d400 double image
Here are the pictures of t-con and that braon one flat cable...Leave a comment:
-
Re: Samsung LE32d400 double image
Yes there is only one brown ribbon with some little black element stuck in the middle of that ribbon as a part of it and it is hot. I have disassembled tv earlier it is not that ribbon from the picture. I will add picture of it later today.
I have tried to factory reset even in service mode tried to change model - no result.
Picture is bad in all modes (inputs)Leave a comment:
-
Re: Samsung LE32d400 double image
Thank you for your reply. I already tried to disassembly panel but there is only one ribbon glued to the panel glass directly from Tcon. When I apply little pressure to it there is no change on the screen.Leave a comment:
-
Re: Samsung LE32d400 double image
Here are the pictures
Tcon is mounted directly to the bottom of the panel, flat cable that comes from mainboard is detachable, the second one from Tcon to panel is glued....Leave a comment:
-
Re: Samsung LE32d400 double image
Tcon board is mounted on the panel and it's flat cable is not detachable.
I am new on this forum, did not figured out yet how to upload pictures.Leave a comment:
-
Samsung LE32d400 double image
Samsung LE32d400E1W has gost image.
Seems like the red colour is offset by 1mm down.
4cm on the bottom of the screen is working fine. -
Re: Sharp LC-46DH77S Communication error? Bad main board?
Changing the mainboard will be the last option, I will try to repair it on the chip level. Thank you, your answer helps to focus on this board. I started to think that the T-Con is bad because it got 4x12V on connector and going nowhere else further.Leave a comment:
-
Re: Sharp LC-46DH77S Communication error? Bad main board?
Hi joens
I have Aquos LC-32DH77E with same mainboard duntke685WE and inverter board runtka456wjqz and have the same problem. Measure same voltages and same d2002 blinking.
Didn't solove problem yet.Leave a comment:
No activity results to display
Leave a comment: