Re: A guide to fixing/troubleshooting some common plasma TV problems
Cheers Tom,
Cant believe that a bad capacitor can cause that fault.
I hope that the two buffer boards connected to the Y-Main board are OK?
Will post new pictures of the boards and sticker tomorrow.
All the best Tom and thanks
Regards,
Mark
Announcement
Collapse
No announcement yet.
User Profile
Collapse
-
Re: A guide to fixing/troubleshooting some common plasma TV problems
Thanks Tom. will do that tomorrow and get back to you and will supply new pictures....I know that the Y-Main board is the one connected to the two buffer boards (hope that is correct)
If the Y-Main board is faulty? would it be likely to be a bad cap or faulty mosfet transisters?
Thank you again Tom
Kind regards
Mark
Leave a comment:
-
Re: A guide to fixing/troubleshooting some common plasma TV problems
Hi Tom
Thank you so much for your advice
I have a digital multimetre, so what do i need to check next?
Would I be better off buying another Y-Main board? Im ok with checking voltages and changing components though
I have downloaded the service manual for the TV
Once again i would like to thank you for your help.
Best wishes
Mark
Leave a comment:
-
Re: A guide to fixing/troubleshooting some common plasma TV problems
Hi.
I hope somebody can help me.
I have a PHILIPS 50PFP5532D Plasma TV.
It works fine for about 20 minutes then the picture breaks into pixelated colours with moving vertical lines sometimes...but if you have a dark image the picture is fine until you get a bright image....turn it off and on and it works for another 20 minutes then does the same again
ive attached some pictures of the TV
Thank you for your help
Kind regards...
Leave a comment:
-
Re: A guide to fixing/troubleshooting some common plasma TV problems
Hi.
I hope somebody can help me.
I have a PHILIPS 50PFP5532D Plasma TV.
It works fine for about 20 minutes then the picture breaks into pixelated colours with moving vertical lines sometimes...but if you have a dark image the picture is fine until you get a bright image....turn it off and on and it works for another 20 minutes then does the same again
ive attached some pictures of the TV
Thank you for your help
Kind regards...
Leave a comment:
No activity results to display
Show More
Leave a comment: