Re: Need some advice on which caps to replace.

Hey guys,

It seems like replacing the capacitors did not fix the problem.

The monitor works but after using it for a while it randomly goes to a black screen with the green power led blinking.
Then after a while the monitor goes back to normal.

Anyone has a clue what the problem could be? Should I just get rid of the monitor?

Re: Need some advice on which caps to replace.

So I finally managed to replace the caps using my sloppy soldering skills (1st time using a solder) and it seems like my monitor is working again!
[url=http://i.imgur.com/buWFmw5.jpg][/url]
(ignore the yellowish tint. it's from f.lux)

Let's just hope it doesn't randomly show a black screen again.

Thanks for the advice Mariushm!Re: Need some advice on which caps to replace.

So I finally managed to replace the caps using my sloppy soldering skills (1st time using a solder) and

Hello everyone,

I stumbled upon this forum after searching for a way to fix my old monitor.
It used to flicker a lot but nowadays it randomly shows a black screen for a few minutes before turning back to normal. (sometimes the green led is blinking)

I'm guessing I need to replace the caps because I disassembled the monitor and found out that all the caps are from Capxon and I found a vid about the same monitor on youtube: [url]http://www.youtube.com/watch?v=fT9H2bn0Lio[/url] (the board does not look the same though)

Do I need to replace all...

Re: New Members - please post your introductions here

Hello everyone,

I'm currently trying to fix my monitor which is what led me to this forum.

Cheers