Hi,
Can some please remove the password from the bin file?
Thanks
Suri...
Surej
Member
Last Activity: 03-17-2024, 10:11 AM
Joined: 10-14-2008
Location:
-
Apple A1398 bios pass unlock help needed.
-
Re: Help needed in finding a LCD
Hi,
Still no luck in finding...
I am attaching the back label..
Thanks
Surej... -
Re: Help needed in finding a LCD
Thanks for the links..Leave a comment:
-
Help needed in finding a LCD
Hi,
I need to find an LCD with model no LTN190W1-L02 Samsung panel. It's for a Sony all in one pc. It has 2 CCFL and 30 pin display connector. I tried a few other 30 pin panels from laptop but did not work. Is there any way I can modify any standard 19" panel from standard wide screen monitors..? This one is a (1680 x 1050) WSXGA+ , since the lcd is cracked it shows all white light when started. The panels i tries shows just black background even though backlight is there.
Thanks
Surej -
Re: Dell 2209WAF works for only 5 min
Hi,
The picture of the chip is attached ...
now after changing the capacitors it's not turning on..I used philips caps..I have ordered panasonic to replace them.
The inverter gets 24 v.
Thanks
Surej...Leave a comment:
-
Dell 2209WAF works for only 5 min
Hi,
I have a Dell 22 inch works for 5-10 min then switches off. It can be switched on agin after 10 min and stays on for 5-10 min and go black screen.
I have tried changing the four 470/35v caps on the left side .
Thanks
\surej... -
Re: Dell 1703fp Inverter problem
it was the transformer and i replaced it and working fine
thanks
SurejLeave a comment:
-
Re: Dell 1703fp Inverter problem
I noticed one problem that one side of the inverter dont give any high voltage . The one on the left in the pciture dont give any output..
Thanks
SurejLeave a comment:
-
Dell 1703fp Inverter problem
Hi,
I have the 2 sec to black problem with this inverter I got 2 similar screens when i swapped the inverter it works fine so the ccfl is ok..
u4 and u6 are fds8958
u5 is kia 324
Thanks
Surej... -
Re: Dell 1701FP Inverter Problem
It's easy if you post the pictures..Leave a comment:
-
Re: cy199 i-inc showing blue and yellow led only when connected
I used another eeprom from one small 7 inch screen and it worked. so i think the eeprom dont have any valid data to start the screen or else it wont work . have checked all menu function and it's working properly. the setting can also be saved.
Thanks for all the help...
Regards
SurejLeave a comment:
-
Re: cy199 i-inc showing blue and yellow led only when connected
Thanks I'll try and let you know..
Thanks
SurejLeave a comment:
-
Re: cy199 i-inc showing blue and yellow led only when connected
I googled this and some prople have fixed this issue by reprogramming the eeprom...but i still could not find the eeprom file to flash it..seem to be a software issue..
[url]http://www.fixya.com/support/t636635-inc_cy199d_lcd_monitors_will_not_turn[/url]
post no 7
Thanks
SurejRe: cy199 i-inc showing blue and yel...till could notLeave a comment:
-
cy199 i-inc showing blue and yellow led only when connected
Hi,
I got a cy199 i-inc 19 " screen that when connected shows only blinking blue and yellow led.
The pictures are attached.. I have changed all the capacitors but still no luck..
any idea how to fix this..?
Thanks
Surej... -
Re: Mag LT916s Model 900p 19" LCD dropping like flies
Is it possible to get the schematic of LT916s power board...
Thanks
SurejLeave a comment:
No activity results to display
Leave a comment: