Re: LG Flatron L1933TR again....

So I got the caps today, went ahead and did the swap, plugged everything back together before reassembly and turned it on. Power LED came on along with the backlights however screen was blank like with klaxon44. Display detected on my computer fine and the backlights powered up when I moved the mouse over to the screen but it was blank. Turns out stupid me had the connector that plugs into the display from the logic board upside down. Flipped it around and everything works just great.

I just wanted to thank everyone who contributed...

Re: LG Flatron L1933TR again....

Great, went ahead and placed the order. Thanks for your help.

Re: LG Flatron L1933TR again....

Woke up a couple days ago to find my L1933TR would not turn on (power LED doesn't come on, screen doesn't light up, nothing). Googled looking for a fix and found this thread. I opened it up and sure enough C203, C204 and C207 are all bulging (Samxon GF(M)'s). I also checked the fuse with a multimeter which is intact. I figure I'll go ahead and replace all seven Samxon GF(M)'s while I'm at it (the ones listed in the first post). I've put together an order on digikey as follows:

[URL="http://www.digikey.com/scripts/DKSearch/dksus.dll?Detail&itemSeq=134227616"]1x...

Re: New Members - please post your introductions here

Hey,

Had an LCD monitor give out on me a couple days ago and found this forum while looking for a fix. Definitely a lot of great useful info. Came here looking for advice.