Re: Samsung 32in LN32B360C5DUZA no power no standby

Sorry for the delay I was finally able to re-do the voltage readings. I read them using a chassis ground and a pin ground and get the same readings both ways. I needed to remove the ribbon cable in order to read this since the probes are to thick to fit down into the connector on the ribbon.

I am pretty novice in this area, I believe the reading I have are in volts. I have Klein MM200 auto-ranging multi-meter so can only select to read voltage and then I switched into DC mode. There is a small "m" after...

Hi. I have a 32in Samsung model LN32B360C5DUZA that one would not turn on. The red standby light is not light and nothing is happening when I press any of the buttons on the TV or the remote.

My problem appears to be the same as mootink's in this thread [url]https://www.badcaps.net/forum/showthread.php?t=21742[/url] but as far as I can tell the diodes that mootink found shorted are fine on my board.

Also the service bulletin that budm mentioned does not seem to be affecting my board as diode DP805 has different numbers on it (as best I can see with desoldering it)....

Re: New Members - please post your introductions here

Hi all. I found this site looking for reasons as to why my Samsung tv stopped powering on. I found a thread here that appears to be for the exact same problem so hopefully it will help me debug and fix the problem. I will say that I have little to no experience at this level of electronics. I have built my own computers in the past but have not gotten done to the cap level. So hopefully everybody will be tolerant of novice questions as I am not even fluent in multimeter use. I will try to search for answers before posting questions...