Re: New - Harman Kardon AVR1700 - No Audio

The thread that drew me here ended with discussion of adding a fan and the new HK AVR 1710 has a fan so I would consider adding a fan if these are prone to failure from heat.
I wouldn't know where to tap in to DC circuit do add a fan but I know I could easily run off of 120vac from the PS.
[url]http://www.ebay.com/itm/120VAC-3-Fan-2266434-/161063775148?pt=US_CPU_Fans_Heatsinks&hash=item2580262bac[/url]

I could use a DC relay to turn on fan. I would worry about additional load on the PS if I tried to run a DC...

Re: New - Harman Kardon AVR1700 - No Audio

Received cap today and soldered it in and powered up and tested the +45/-45 v section and I was getting +51/-51 v so I went ahead and put it all back together and it works great! I was initially worried when I had 2 speakers hooked up and it seemed like the sound was fading in and out but the receiver was in virtual surround mode and once I put it in 2 channel all was well. Currently all hooked up in 5.1 and networked so I can use my phone to control it since I don't have the remote. Also trying to use Bravia link and it works most of the...

Re: New - Harman Kardon AVR1700 - No Audio




Thanks tibimakai.

Ordered from digikey yesterday. Hope to get it installed as soon as it comes in and report back....

Re: New - Harman Kardon AVR1700 - No Audio

OK thanks Tom. With calipers it is .065x.110 so rounding to the closest combination it is a 1206.
My new choice is this one:
[url]http://www.mouser.com/ProductDetail/Murata-Electronics/GRM3195C1H222JA01D/?qs=sGAEpiMZZMvQvaS66kI3Tmngaz3eEByV5IjKkULBX9Q%3d[/url]
And since I'm going to go through all this to get up and running I picked one that is .38 cents instead on .06 . I think its more because it is +/-5% Tol.


Have not ordered - hoping to add more to the order to save on any future shipping cost....

Re: New - Harman Kardon AVR1700 - No Audio

OK i received ESR tester and de-soldered c906 and when I used the solder sucker not only did it take the solder it also sucked up the mini smd cap. When I retrieved the capacitor form the solder sucker it did not have solder on on end of it. I tried to re solder the missing end but it would not stick.

I feel like when I was trying to test it in circuit I recall having to apply a little extra pressure to get any sort of reading so I'm wondering if it had already separated on that side before I even touched it. But it could...

Re: Harman Kardon AVR1700 won't power up

I moved to [url]https://www.badcaps.net/forum/showthread.php?p=358479#post358479[/url] because issue is a little different. ThanksRe: Harman Kardon AVR1700 won't powe...ferent. ThanksRe: Harman Kardon AVR1700 won't power up

I moved to [url]https://www.badcaps.net/forum/showthread.php?p=358479#post358479[/url] because issue is a little different. Thanks

I decided I technically hijacked another thread even though it was solved, so I am moving here because its not exactly the same issue.

I'm trying to simplify from Outlaw audio and carver amps to a HK AVR 1700. AVR 1700 powers on great and turns on out of standby fine and all buttons function correctly. Factory reset done on it and have tested all inputs with no sound output.

On the power supply I am not getting the +45/-45v that powers the output board.

I feel comfortable with a meter and am not asking anyone to teach me anything so please just help...

Re: Harman Kardon AVR1700 won't power up

Is it ok to continue in this solved thread or should I post in my own. Similar issue so I will try. Hi I'm trying to simplify from Outlaw audio and carver amps to a HK AVR 1700. AVR 1700 powers on great and turns on out of standby fine and all buttons function correctly. Factory reset done on it and have tested all inputs with no sound output.

On the power supply I am not getting the +45/-45v that powers the output board.

I feel comfortable with a meter and am not asking anyone to teach me anything so please just...