Re: Samsung HP-S5033
Sorry, been busy getting married.
Finally got to sit back down with this...
Checked voltage outputs with everything unplugged. All good.
Plugged everything back in (I thought) & same issue. Then realized the Y-main was still unplugged. Hooked that back up and started getting bad noises and voltage drops. Time to double check the caps on that I guess?
daspyderman
New Member
Last Activity: 11-24-2013, 01:49 PM
Joined: 07-22-2013
Location: Buffalo
-
Re: Samsung HP-S5033
Thanks for the links. Will check that today once I'm home from my real job. Also, being a noob I'm assuming "sound" refers to from an external device. The tv does make it's normal startup noises but I'm unable to get sound through it with inputted a/v.Leave a comment:
-
Re: Samsung HP-S5033
Yes, yes and yes.Leave a comment:
-
Samsung HP-S5033
Would like to give more life to this 50" plasma that's done me well for quite a while. Will fire up but no picture, no sound. Tested all fuses, good, tried disconnecting both x/y mains, no change. Replaced power which I had, no change. Thought I had checked all the boards pretty well until I found this today (pic attached) on the Y-main. How to confirm this is the issue or other suggestions? Don't really want to order an $80 board for nothing. Thanks ahead of time for your help & time.... -
Re: New Members - please post your introductions here
Just jumping on board, glad I found this forum and looking forward to give (and take away) lots of useful knowledge here. In the middle of a project now but wanted to post and get this out of the way.Leave a comment:
No activity results to display
Leave a comment: