Re: need help on my Asus P4FM motherboard...
im sorry its not asus its jetway.... wrong post duh....
wonder_step
Member
Last Activity: 09-22-2006, 01:36 AM
Joined: 03-03-2006
Location:
-
Re: help here plssss....
yep the psu stays on but there were no beeps and the only sign is the orange led at the female lan socket....Leave a comment:
-
Re: Help in my Asus P3B-F
thnx guys... my board is all recapped now and its running smoothly.....
best site ever....Leave a comment:
-
Re: help here plssss....
already checked the traces around cpu socket and theres no damage.... maybe its a bad chipset... or something...Leave a comment:
-
Re: Help in my Asus P3B-F
the missing caps were all 1000uf 6.3v i had already replaced it with 1000uf 10v and the board is working great...
thnx any way.. all i need is the jumper settings can you give me????Leave a comment:
-
Help in my Asus P3B-F
I have bought an asus P3B-F with an Intel 440BX chipset....
but the previuos owner had removed all the good caps and nothing is left can u give me what are the caps in it???? -
I Need help on this monitor...
I have a leapfrog monitor model no. CM8588D i need a schematic diagram of its board because i want to know the values of the two burnt resistors and one transistor, the burnt resistors are R113 and R115 the transistor is Q101.
if you have a schematic or knows where to get it plzzz help me.... -
Re: Help on my videocard.... wont display correctly...
i already did that in my bios but seems nothing is wrong with the bios....
i already tried to load the setup defaults but its still the same, it still displays the garbage charactersLeave a comment:
-
Re: Help on my videocard.... wont display correctly...
what do i need to do with this problem???? can anyone teach me???Leave a comment:
-
Re: Help on my videocard.... wont display correctly...
how??? where in the bios????
im sorry im a newb...Leave a comment:
-
Re: Help on my videocard.... wont display correctly...
My videocard displas garbage characters on the screen..... how do i repair it????Leave a comment:
-
Re: help here plssss....
well i made sure that the board is well dried....
i washed it then after that i let it dry up for 24 hours then i also made sure that its really dry by leaving the board dry up under the sun for 5 hours.....
the processor is good and doesnt have any damage....Leave a comment:
-
Help on my videocard.... wont display correctly...
The drivers are good and installed properly...
but the display is not correct....
letters are separated... maybe something wrong with my videocard...
its an inno3d geforce fx 5200 -
Re: help here plssss....
i washed it with a soap solution.... ok ill take pictures and ill post it here....Leave a comment:
-
Re: help here plssss....
i cleaned the board because it was so dirty, i didnt changed any settings.... i don have video and the speaker is correctly wired.... i saw that the VRM chip is rusted....Leave a comment:
-
Asus Cusi-M doesnt post
I had an Asus Cusi-M, when i turn it on the board powers up but suddenly it goes to standby and it doesnt post.... the fan wuld start spinning the it would turn off..... -
need help on my Asus P4FM motherboard...
I just recapped my asus p4fm motherboard but when i turned on the power it wont post but the cpu fan works.....
where do i check the board if it had any problems....
i also checked the connections but there were no shorted or open circuits... -
Re: help anyone about MSI board
ok ill try to get the controllers numberLeave a comment:
-
just a question about motherboards
can i use two processors at the same time with a motherboard wich has a slot socket and a socket 370? -
Re: help anyone about MSI board
can i use these kind of transistors????
Low VCE(sat) Transistor(Strobe flash)
2SD2098 / 2SD2118 / 2SD2097 / 2SD2166
heres the link of its datasheet [url]http://pdf1.alldatasheet.co.kr/datasheet-pdf/view/35892/ROHM/2SD2098.html[/url]Re: help anyone about MSI board<br /...iew/35892/ROHMLeave a comment:
No activity results to display
Leave a comment: