Re: Chimei 19" Monitor CMV938D

I've tested the fuse with a multimeter (resistance), and it comes up with 0, meaning the fuse should be working.

I've done a bit of research on which capacitors to get.... is the below correct?

Capacitors to change:

Note: Impedance ≈ ESR (Equivalent Series Resistance)?
Capacitance same?
Voltage same or higher?
Ripple same or higher?
Impedance same or lower (not too much lower)?

Replace 400V 120uF (at location CE106)
Aluminium cap, M, 18*31.5

Replace...

Hi everyone,

I've got a Chimei 19" Monitor (CMV938D) which has a backlight problem, under no light, you can still barely see the display.

Symptoms:
Turns on as normal. Detects input fine (as evident from green led light), goes to standby if no input detected (as par normal). However, the backlight seems to be dead.

Cap info:
Big black cap: 120uF, 400V 0615(M) 105C(AQ)P
Brown cap (bottom-mid): 22uF 50V, P61?, CapXon
Black cap (top-right, lying down): ?uF, ?V, P614 VENT KF 105C, unknown brand
Black cap (left of...

Re: New Members - please post your introductions here

Hi

I joined this forum in hopes that I can solve the problems (probably about badcaps :P) on my TV and monitor.