Hey all, I've decided to order a replacement Y-Main board for my Samsung 50" Plasma display (PN50C590G4FXZC).. It's my first time ordering parts and very few sites make mention of compatibility specifically for the XZC, even though many boards are identical they only guarantee compatibility with the XZA models. As I am new to ordering boards I have a few questions.. Firstly does the card need to be the EXACT same? As an example i've found many cards which match the PCB and PBA's but have a varied revision #. Does the revision need to match or are all revisions compatible? (I've found numerous...

First time user! Tried posting yesterday but hadn't left a whole lot of information. I was watching my set over the weekend and heard an audible sound from the back of my set. My picture and menus are completely gone, however sound remains. I did a continuity test on the only ceramic fuse I could find in the entire set and the fuse was functioning properly. Based off the walk through on this board the most logical fault would be the y-sustain, or y-main card as Samsung refers to it. It's my understanding that the majority of y-sus cards have their own fuse, and based on my research the last couple...

New to the board and new to Plasma troubleshooting.. Based on what I've read my problem stems from the Y-Sus card (sound, no picture).. I attempted to check the fuse on the card.. Alas there is none that I can locate.. The card is lj92-01728a, I've attached a few pictures of the card.. There is a signle ceramic fuse on the power card which checks out fine, but I can't seem to locate any others anywhere else. I don't want to replace the entire y-sus card before I determine the card is the issue and that the proper fuses check out. As previously stated I am new and have probed previous threads but...

Re: New Members - please post your introductions here

Hey all, new to the board. Hoping to get some advice on a problem with my Samsung Plasma that has me completely stumped, and contribute myself If I can!