Re: Panasonic TC-P58S1 7-blinks

Fantastic! Thanks for those documents. I just completed troubleshooting. I have gotten it to turn on with a black screen by isolating the SU and SD boards at the same time. The resistance on both the SU and SD boards was zero and the SC board had aprox the correct amount of resistance. Does anyone have any sites they recommend to purchase these two boards from? Thanks for all the help guys.


Jordan.

Hello guys. I'm new to the thread. My name is Jordan and I have some background in electronics from my aviation career in the military a few years back.

I have a Panasonic Plasma here that just up and died on me. It's a TC-P58S1 manufactured in September 2009. Its a 120v USA version. Here is my troubleshooting so far.

TV plugged in - power on - fans on for 2 seconds, then off and 7 red blinks. on a
quick side note, there is a micro green led on the right side SS board and left side
SC card, they are both on during this phase. I read two things on...

Re: Panasonic TC-P42S30

Hello guys. I'm new and cannot start a new thread yet. Sorry if this is considered hijacking. If it is, please any moderators make this its own thread or delete it. Thank you.
My name is Jordan and I have some background in electronics from my aviation career in the military a few years back.

I have a Panasonic Plasma here that just up and died on me. It's a TC-P58S1 manufactured in September 2009. Its a 120v USA version. Here is my troubleshooting so far.

TV plugged in - power on - fans on for 2 seconds, then off and...