Re: VIZ WP 708 Power Supply Issue

I have the complete manual, but its vague on some some points, just referencing using the propriatory cable, which I do not have of course
Here is an example.....

Re: VIZ WP 708 Power Supply Issue

Sorry, now I see the WD reference. I'd guess that the WP is an update to the WD maybe? My PS says WP on every tag and lable, so should be good to go.
Once again thanks..
Rob

Re: VIZ WP 708 Power Supply Issue

Yes, its the right schematic, I thought I may have misnamed the file after scanning it, but I'm not seeing any reference to "WD". That's the way I read the schematic as well, but was just wanting to make sure that there weren't some passive components in the cable itself. That link you posted leads me to think not. I'll wire up a din plug and do some testing over the next couple days and see what happens Thanks for the help..
Rob

Re: VIZ WP 708 Power Supply Issue

Sent that too fast, thanks for the link to the info, looks straight forward.
Rob

I can also scan in other parts of the manual if anyone needs it.

Re: VIZ WP 708 Power Supply Issue

Yes I do.


[ATTACH]65793[/ATTACH]...

Re: VIZ WP 708 Power Supply Issue

I just bought one of these that seems to be in good working order. However it did not come with the 5v "sensing" output cable. There is a 4 pin DIN connection for this cable and from what I can gather from the user manual it ends in two alligator clips. The additional two pins must be providing a current feedback of some type to regulate the PS as far as I can figure. I just wonder how I can fabricate this cable without some further information that was not included in the PS schematic. Any ideas from those that still have or had one?...