Re: Asus A8V fails to boot

Thks for the info.

Will see if next time I can pass special order some low ESR from the electronic shop.

Re: Asus A8V fails to boot

I replaced the 6 KZG with the Rubies & still no boot with processor & one ddr ram in slor A. However when I moved the dimm to sockets b i.e. third one, it is now ok. Only the 2 dimm slots 3rd & 4th are ok.

What could be wrong as initially all dimm sockets were filled with 2* 1gb + 2 * 512 mb. I guess that the problem was not bad caps!

My mobo a8v had some display issues, displaying some dots which I attributed for a bad driver or failing video card, but I continued to use it until it does not boot anymore. Only then I replaced the psu Antec, which still works, with a brand new one make Young Year & replaced the video card with another good AGP card as well as a PCI one but still no boot. Also replaced the memory card with other Kingston which I know is good but still no boot.

On power on the cpu fan & the power led works but there is no beep & no display on the vdu, even after trying several times....

Re: Replacing a Quanta LCD from HP 1502 with a HannaStar lcd

Thks for the quick reply.

Will check out the recommended sites as it seems to cover a wide range of lcd panels.

What is a 1 channel lvds panels??

After carefully looking at the panel circuit board, it seem that I can replace the top ccfl by lifting the panel circuitry.

Thks again.

Hi, thks for this very informative site & learn lots of tips.

My problem is that I have three HP1502 LCD Monitor Model no PE1234, Product no P9617D, May 2004, 15 inch LCD panel Quanta QD15x202, which had a red backlight for a few seconds then the backlight switch off but the Video is still working.

First I tried to replace all the 7 capacitors, having read about HP1502 thread, although they look fine but the issue still persist so I tried to lid another 15 inch LCD panel HannaStar HSD1509MX17 that I had from a Viewsonic VA5036 Model no VS11248 & the backlight...