Re: Test LED TV strip

I am going to order the test device, but it came from China and will be arrive until the end of July.It's possible to test the LED's when the strips are inside the tv?

Re: Test LED TV strip

Ecking 767,
I just change the 3 PCBoards, first vthe power supply, next the T-con and last week the main board. All the PCBoards with a warranty to work.
The flashing error code is "Inverter/Lamp system failure". Any advice will be of a lot of help, I'm working in this TV more than a month.

Re: Test LED TV strip

How can I tested by myself, can I use a voltmeter, or can I connect a ten 9v batteries and connect the strip?

I have a sharp TV model LC-60LE810UN, I already change all the boards and still have the same problem- flashing the logo one short one long -so the only thing missing before I quit from this TV is check the LED strip (I already remove one from the TV. The strip have a set of 30 LED's and a two wire connector I would like if anybody know how I can check this LED strip?
Some history, when I replaced the power board, I access the service code and the screen was on, then I turn off the TV, and from that day I can't get anymore the service code or the screen lite.

Re: SHARP LC-60LE810UN need help

When you replace the power supply board, you need to adjust "VCOM ADJ" in the service mode