Re: Westinghouse LD-4655VX - My First LED


Yeah, the whole connector is gone. Bare metal with 12 very small points. I believe its done....

Re: Westinghouse LD-4655VX - My First LED


I tried holding the cable in place with my hand and couldn't get it to power up. So you didn't have any of the clip at all and were successful at taping the ribbon cable directly to the led strip? if you see in the pics there is barely any points of contact left. Thanks...

Re: Westinghouse LD-4655VX - My First LED

I need some more help, earlier today I posted how the tape fix worked. In an attempt to add tape to the other side to avoid future failures the entire lock for the ribbon cable fell off the led strip. I'm killing myself right now as 20min ago I had a 100% working TV. Is there anyway to connect the ribbon cable directly to the strip or is there a place to buy a new led strip? Please help...

Re: Westinghouse LD-4655VX - My First LED



I was thinking he was selling a non working model. 50 would be crazy if it worked, I have seen this for 50-100 not working....

Re: Westinghouse LD-4655VX - My First LED


you are selling one for $340? The problem may be that you can buy them new for about 300 or used for about $50-100. I paid 375 new 2 years ago. Hope that helps...

Re: Westinghouse LD-4655VX - My First LED

I have to say I read alot of forums and dont really ever post, but I had to write a quick note on here. I need to give a huge thank you for everyone in this forum as I have finally resolved my issues without spending a dime. I found this a month or two ago and quickly took off the back and disconnected each side to isolate the issue and have been using the tv dim on one side until we bought or replacement. The new TV (LG LED) has arrived and this past weekend was time to tear down the westinghouse even further, upon further inpection I found...