Re: Problem with Acer AL1715 Monitor

Sorry, it was overcast. I took some pics today. Also recheck all my solders they seem to be making good contact....

Hi all,

I have a problem with a LCD monitor that I recapped today(as per images), but before I start I will mention what happened to the Lcd before the recapping:

When the Lcd was turned on it displayed the Acer logo but very faint, then after 2 seconds or so it when dark, the green led remained on.

Read some posts on this forum they mentioned that when this happens there are some bad caps on the inverter board.

So I managed to replace the following 6 caps (as per images):

2 x 470uF 16v
2 x 1000uF 16v
2 x...