Re: Panasonic TH-46PZ80U
Thanks for all your help guys, I completed the repair and my TV is up and running. Fans sound a bit odd though, like a bit of a muffly whining sound, very quiet, any thoughts?
TVs been off for so long I don't know if that's normal or not, other than that it's working as intended. Thanks again.
Announcement
Collapse
No announcement yet.
User Profile
Collapse
-
-
Re: Panasonic TH-46PZ80U
I am going to attempt the fix tomorrow. Is a solder sucker or a wick easier to use for the purpose of removing the modules?
Thanks
Leave a comment:
-
Re: Panasonic TH-46PZ80U
Yes, I watched all the video. I did the air can/refrigerant diagnostic, the TV powered up after I used the refrigerant on the TEA1611 chip that is more toward the left side of the PSU. It was giving the 2 blink/10 blink error code beforehand. I used the refrigerant on one chip, attempted power up, and waited 15 minutes and did the other one. The TV only turned on after I used the refrigerant on the chip located more toward the left.
I have never soldered before but I feel like this is a good learning experience and I'd prefer to attempt it myself....
Leave a comment:
-
Re: Panasonic TH-46PZ80U
Anyone have a recommendation as far as what solderer to use? Also, just so I'm clear, I need two TEA1611 chips and 2 ceramic capacitors to make this repair?
What is the exact capacitor for this repair and where can I find it? Any help would be much appreciated, I've been TV-less for like 5 months now and I really want to play GTA V
Leave a comment:
-
Re: Panasonic TH-46PZ80U
Can anyone suggest caps or point me in the right direction? I'm open to fixing the issue but like I said I have 0 experience in electronics/TV repair. A link to a thread or a link to what I need to get would be much appreciated.
Thanks a lot guys.
Leave a comment:
-
Panasonic TH-46PZ80U
Hello, first post here.
I've had my Panasonic since 2009. It operated perfectly until about 2 weeks ago, when it wouldn't turn on suddenly and gave me the 10 red blinks issue. I unplugged all inputs, unplugged the TV, and the next morning plugged everything back in and it worked perfectly.
However, today it won't turn on and is giving me the 2 red blinks error. I have no idea how to fix this issue, and am pretty distressed as I don't have the money to pay someone to fix it, and the TV is only 4 years old. I haven't tried to contact Panasonic but I'm sure the TV is...
No activity results to display
Show More
Leave a comment: