Re: GA-8SIMLFS rev 2.0 Time for a re-cap
...and when I got to the store the Panasonics were out of stock. Instead I got 4 Sanyo MV-AX.
despen
New Member
Last Activity: 05-05-2009, 02:30 AM
Joined: 02-10-2006
Location:
-
Re: GA-8SIMLFS rev 2.0 Time for a re-cap
Ok, lucky for me that I wrote a little about my endeavour (=
I bought 4 new Panasonics from the FM series. Tomorrow I will clean the vias and solder them to the board. It will be a tight fit since the old ones were 10 mm in diameter and the new ones are 12,5 mm in diameter. /=Leave a comment:
-
Re: GA-8SIMLFS rev 2.0 Time for a re-cap
I will probably go for either:
Panasonic ECA1AHG332
or
NICHICON UPS1A332MHDLeave a comment:
-
GA-8SIMLFS rev 2.0 Time for a re-cap
This motherboard is starting to get rather old but it's rather fun to take out the ye old solder iron.
I noticed a while ago that it was hard to start the computer and when I opened it I saw the reason. The 3300uF caps was leaking, see pictures.
Tomorrow I will get 4 new ones from farnells, probably panasonics.
...
-
Resurrected AOpen AX34 PRO II
Today I recapped my AX34 PRO II, the caps that I have exchanged ar all Lelon 6.3V 1000uF and they where all bulging and leaking. I bought 7 new Rubycon ZL 6.3V 1000uF and now the motherboard is working again.
No activity results to display
Leave a comment: