Re: Samsung UN32EH4003F LED burnout
there may be some moisture on led stripes
Announcement
Collapse
No announcement yet.
User Profile
Collapse
-
Re: Toshiba 32BV500B suspected panel fault
did you try to bypass method?
Leave a comment:
-
Re: Samsung Distorted Screen
clean the lvds cable first.then replace jumper coils on main board.L coils.if nothing happens change the tcon board
Leave a comment:
-
Re: Tcon or bad panel or other!!!????
cof ic fault.may be loose connection
Leave a comment:
-
Re: Samsung LE40C750R2K horizontal lines
did you cut ckv lines?
Leave a comment:
-
Re: blank laptop screen B156XTN02.0
check major panel volteges like vgh/voff/vcom/avdd
it could be a problem with level shifter ic or corrupted flash rom.change the rom ic first.
Leave a comment:
-
Re: Tcl32d99
you need tab bonding machine to repair this fault.
Leave a comment:
-
Re: How I repaired a Toshiba 32" LCD
thanks for the information
Leave a comment:
-
Soniq e23z13a-au
Stuck in stand-by mode.
Checked all the regulators 3.3v ok. Found 1117 adj regulator output voltage drops to 1.3v.it must be 1.5v in this tv.changed the regulator now tv works fine....
-
-
Re: Samsung UE46D7000 - panel or t-con?
did you try cutoff method?
Leave a comment:
-
Re: Is this a bad T-Von?
check the main board.you need to check coil packs.try to replace them or use jumper.trace lvds connector you can find them.if you cannot see the coils clean the ribbon.Last edited by koka0011; 08-17-2017, 08:29 AM.
Leave a comment:
-
Re: Sony KDL-40NX711 Vertical Roll
cut the lines on tcon ckv1/ckv2/ckvb1/ckvb2/stv
Leave a comment:
No activity results to display
Show More
Leave a comment: