Re: Asus Strix 1070 - Bad memory bank?

I actually didn't know that 00ff00ff was a typically a signal of a failed mem controller. What is exactly inversion error? From what i remember from Tech Cemetery videos usually a failed mem controller translates into the full memory channel ( c1 and c0 for this case) failing MATS test. I've checked the die for discoloration at the start of this process but i didn't find anything obvious. Will post a picture later when i get home.
The only possibility other that the dead mem controller at this point is some of the components around...

I have a GTX 1070 Strix that has all the voltages, boots, but shows no image. The screen detects the input after some time, but it stays black. After running MATS i found out that only the Memory Bank c0 was giving errors. Since i don't have a hot air station or skills to change the memory myself i've asked a technician to change the memory bank.
The result was exactly the same. Still no image and still errors on bank c0. As far as i know if the issue is with the memory controller usually the banks fail in pairs (c0 and c1). I'm also making available the mats reports before and after the...

Re: Stupid PSU design FAIL

Why did u multiply the AC Voltage input by 1.414? I understand it has something to do with the rectification process, but im curious =p