Thanks for your help Tom.
I guess I should forget about the power supply board and start looking elsewhere.
Im guessing the flashing LED is a fault code, but will probably end up costing much more than the power board.
Thanks again
Tristo
Member
Last Activity: 04-07-2013, 01:30 PM
Joined: 04-04-2013
Location: Swindon
-
Re: Finlux 32FLD760P with Vestel 17PW20.v1
Thanks for your help Tom.
I guess I should forget about the power supply board and start looking elsewhere.
Im guessing the flashing LED is a fault code, but will probably end up costing much more than the power board.
Thanks again
-
Re: Finlux 32FLD760P with Vestel 17PW20.v1
I've just had a good play and found the 12, 5 and 3.3 lines.
the 5V and 3.3V are there all the time.
but the 12V is only present when the LED pulses on. (ie when you press the standby button on the remote) it then drops back to 0V when the LED pulses off. same as the 24V.Leave a comment:
-
Re: Finlux 32FLD760P with Vestel 17PW20.v1
Thats a good plan, Though I dont think my boss would agree, I work 3 shifts, lol.
I wont get a chance to look now till sunday. I'll post any findings then.Leave a comment:
-
Re: Finlux 32FLD760P with Vestel 17PW20.v1
Sorry Tom, I'm having to call it a night.
Was hoping someone might say "oh thats a common problem, try such and such"
I will have another look and post back when im more awake.
Thanks again for your help
Leave a comment:
-
Re: Finlux 32FLD760P with Vestel 17PW20.v1
OK, thank you for your help. I guess I'll save my money.Leave a comment:
-
Re: Finlux 32FLD760P with Vestel 17PW20.v1
So do you think I am barking up the wrong tree, looking at this board for the fault.
Might the fault be elsewhere on the TV?
I don't want to replace this board if its going to make no difference (like the repair kit).Leave a comment:
-
Re: Finlux 32FLD760P with Vestel 17PW20.v1
When the Blue LED is on (standby) they are all at 0V.
When the LED is off they jump to 24.5V
The blue LED has stopped flashing repeatedly now (only does this occasionally). It only goes out when I try to turn on via the remote.Leave a comment:
-
Re: Finlux 32FLD760P with Vestel 17PW20.v1
Yes
It rises to 387V but drops off again,
Then, when the front LED flashes it rises again to 387V.
Repeats this cycle for a few flashes of the LED then settles around 330V once the LED has stopped flashing.Leave a comment:
-
Re: Finlux 32FLD760P with Vestel 17PW20.v1
Yes
It does appear to drop off to 326V almost instantly.Leave a comment:
-
Re: Finlux 32FLD760P with Vestel 17PW20.v1
All plugged in im getting 387V with just power on and 326V when pressing the power on button.Leave a comment:
-
Re: Finlux 32FLD760P with Vestel 17PW20.v1
No. When powered on Im getting 387V which stays constant.
I have nothing connected to the board at the moment.Leave a comment:
-
Re: New Members - please post your introductions here
Hi
My name is Tristan and Im a maintenance engineer for a major car company in the UK.
A few months ago I had a cap problem with a Yamaha AV Receiver and successfully fixed it with help from a similar forum. I learnt alot during this process and have now found this forum after a similar problem with a TV set.Leave a comment:
-
Re: Finlux 32FLD760P with Vestel 17PW20.v1
Firstly I apologise for hi jacking this thread.
I am only after a quick bit of advice before I purchase a reconditioned 17PW20 V1
My TV (fitted with this board) will not come out of standby.
I have read many posts online regarding this board (including this one) and opted to buy the repair kit from e-bay ([url]http://www.ebay.co.uk/itm/261181194808?ssPageName=STRK:MEWNX:IT&_trksid=p3984.m1497.l2649[/url])
Having fitted all the parts, I still have exactly the same issue.
Having just...Leave a comment:
No activity results to display
Leave a comment: