Re: Vizio VW42L FHDTV10A
I replaced both inverter boards with the updated versions which I have not modified. Which FETs are you referring to?
ngoodnight01
New Member
Last Activity: 04-19-2013, 12:48 PM
Joined: 04-02-2013
Location: Huntington
-
Re: Vizio VW42L FHDTV10A
I am getting the correct voltages out of the 24 volt and the 12 volt side to the main board. When I probe the two outlets of u13 ( which is under the heat sink0 I get 1.3volts and 1.1 volts steady. I can see through the holes in the back of the tv especially where the inverter boards plug in that both sides of the LCD are flashing very rapidly. This is doing this with just the TV on and no input to it. If I put an input it shows the input but is flashing very rapidly still.Leave a comment:
-
Re: Vizio VW42L FHDTV10A
I have them uploaded to my album on this forum how do I link it to my post?Leave a comment:
-
Re: Vizio VW42L FHDTV10A
Here is the pics
[url]http://sdrv.ms/ZmK6Qz[/url]Re: Vizio VW42L FHDTV10A<br /> <br ...s/ZmK6Qz[/url]Leave a comment:
-
Re: Vizio VW42L FHDTV10A
I am trying to upload pics but the attachment clip is not allowing me to what am I doing wrongLeave a comment:
-
-
-
-
-
-
-
-
-
Vizio VW42L FHDTV10A
Hello
I acquired this LCD for free and I am trying to fix it. I have found that one of the inverter boards had a fried IC so I replaced the pair as per instructions on this forum. Now I have a picture when plugged into an hdmi source on my laptop but it flickers very fast and makes a very rapid clicking sound. I have looked for bulged caps but have not found them. Thanks for the help
No activity results to display
Leave a comment: