Re: SCEPTRE x22wg-Gamer - NO DVI (Factory Repaired Once)
This monitor is going in the trash. I'm looking for a good deal on a 22 or 23
Announcement
Collapse
No announcement yet.
User Profile
Collapse
-
Re: SCEPTRE x22wg-Gamer - NO DVI (Factory Repaired Once)
My video card has two DVI outputs. I swapped connections on the monitors so the Mac monitor received the video card output that resulted in "no signal" on the Sceptre and successfully got picture. So I believe that should rule out a bad output from the video card.
Then I took the other cable and connected it to the DVI input on an Acer monitor and also got picture. Based on these tests it seems I have a good video card and good cables.
To use a shotgun approach, I replaced all the capacitors...Last edited by RidleyRabbit; 04-02-2013, 03:23 PM.
Leave a comment:
-
Re: SCEPTRE x22wg-Gamer - NO DVI (Factory Repaired Once)
I have two DVI monitors on the PC. What I did was I swapped the connections so the good monitor (Mac Studio Display) had the cable previously feeding the Sceptre. I got a picture on the Mac Studio Display ao I assume the cable is good.
I also tried a different input on the Sceptre -- the HDMI -- and still got "no signal."
I was not able to try the Sceptre on another computer.
Leave a comment:
-
SCEPTRE x22wg-Gamer - NO DVI (Factory Repaired Once)
Hello,
I have read the previous threads and wanted to see get some feedback on my situation. I took my x22wg directly to Sceptre a couple years ago due to a power supply failure. No blue light at all. They repaired it free of charge after the warranty expired. I was pleased but a new problem has arisen. Now I have power but no DVI input. Strangely, it came back for a day but has since resumed with the "no signal" message.
I opened my unit, removed the power board and examined the caps. Pictures are attached. It appears that the factory replaced 4-470uf capXons....
No activity results to display
Show More
Leave a comment: