Re: What is the order and orientation of LCD panel layers?


After watching a number of youtube videos where the LCD panel is taken apart piece by piece and measuring the metal frame securing guide pins on my monitor, I have found out that the up-down/ right-left orientation of all the sheets is fixed, so you can't disorient each sheet itself. But you can change the order of the sheets. On some videos the sheets seem to go one way, on others, the other. In this monitor, a Sceptre x22wg-1080p, the innermost sheet is a white, opaque reflective sheet, then comes the thick light...

Hi all,This is my second post, and I have a general LCD monitor related question, so I am starting here and would receive instruction as to a better place to post. I am replacing the CCFL lamps in a Sceptre X22wg-1080p, and I may have changed the film layers by mistake. The bottommost layer is a reflective white sheet, then comes the Glass light guide with an etched grid on one side- and I need to know which way that etched surface goes, towards the bottom or the top, then I need the order of the two Prism Sheets (V and H), if there is a top or bottom orientation, if it makes a difference. Finally...

Re: New Members - please post your introductions here

Hi, just a little palaver to break the ice here. Actually I am iced in here near Boston, where I have to work for a few months. I normally reside in Miami and I miss the sun a lot. I have worked on so many kinds of things over the years I can't even remember, but I am currently working on an LCD monitor changing the CCFLs, and I ran into a little problem restacking the plastic sheets in the panel. So if anyone wants to put me onto the right forum to post that would be nice. Thanks [url]https://www.badcaps.net/forum/images/smilies/compy.gif[/url]...

Re: Acer AL2416 AL2416W 24" 1920x1280 LCD Monitor

This is my first post, and I have a general LCD monitor related question, so I am starting here and would receive instruction as to a better place to post. I am replacing the CCFL lamps in a Sceptre X22wg-1080p, and I may have changed the film layers by mistake. The bottommost layer is a reflective white sheet, then comes the Glass light guide with an etched grid on one side- and I need to know which way that etched surface goes, towards the bottom or the top, then I need the order of the two Prism Sheets (V and H), if there...