Re: magnavox 32MF605W TV wont turn on
thanks for help . i found problem inverter board has visable short on board
jack1
Member
Last Activity: 08-31-2014, 10:57 AM
Joined: 03-18-2013
Location: gladwin mi
-
Re: magnavox 32MF605W TV wont turn on
using proper ground 14.5 14.5 23.9 1.4 3.2 0.0 0.0 0.0 3.2 0.0 to main boardLeave a comment:
-
Re: magnavox 32MF605W TV wont turn on
yes i checked with battery. negative side of large cap 120 uf 450vLeave a comment:
-
Re: magnavox 32MF605W TV wont turn on
changed power cord now backlight comes on for two seconds. if you could tell me what readings should be and also where to hook up black probe on board i could give you right readings .i am sorry for miscommunication on my part i am trying to learnLeave a comment:
-
Re: magnavox 32MF605W TV wont turn on
i checked in vdc mode . left top 10 pin conn to vid board 53.7 53.5 53.6 53.553.6 41.2 37.9 37.937.8 37.8 9pin conn right top to main board 47.5 47.6 53.5 41.0 39.7 37.6 37.6 39.9 37.8 5 pinn conn bottom left 39.8 39.8 39.0 39.8 39.7 thats all on power boardLeave a comment:
-
Re: magnavox 32MF605W TV wont turn on
thank you. any idea on the other problem?Leave a comment:
-
Re: magnavox 32MF605W TV wont turn on
thanks for help. sorry if i am doing something wrong .no offence. i discovered something new .i pushed the menu button and green light stayed on so i hooked dvd to component and i now have sound but black screen and no backlight. original problem was power supply and that is good. any idea what to do nowLeave a comment:
-
Re: magnavox 32MF605W TV wont turn on
checked with battery.used my fluke meter. still 3.0 on all 9 connectors not 8 and also checked bottom connector to mainboard same. meter has one setting for ac. here is a picture...Leave a comment:
-
Re: magnavox 32MF605W TV wont turn on
using right ground got 3.2 on allLeave a comment:
-
Re: magnavox 32MF605W TV wont turn on
starting at the top red wire 1.176 1.171 1.169 1.162 1.160 1.155 1.156 1.158 1.169 the cap is a 120uf-450v 3.199 both sides fuse reads 59.5Leave a comment:
-
Re: magnavox 32MF605W TV wont turn on
5.95 at fuse 3.02 on large cap and the other places i could get at. i changed to oher power board and got same readings.when i push power button light goes green then oargeLeave a comment:
-
Re: magnavox 32MF605W TV wont turn on
yes i doLeave a comment:
-
Re: magnavox 32MF605W TV wont turn on
got another camera[ATTACH]84940[/ATTACH]
[ATTACH]84941[/ATTACH]
[ATTACH]84942[/ATTACH]Re: magnavox 32MF605W TV wont turn on
got another camera[ATTACH]84940[/ATTACH]
[ATTACH]84941[/ATTACH]
[ATTACH]84942[/ATTACH]Re: magnavox 32MF605W TV wont turn on
got another camera[ATTACH]84940[/ATTACH]
[ATTACH]84941[/ATTACH]
[ATTACH]84942[/ATTACH]...Leave a comment:
-
Re: magnavox 32MF605W TV wont turn on
some more pictures...Leave a comment:
-
Re: magnavox 32MF605W TV wont turn on
best i can do...Leave a comment:
-
magnavox 32MF605W TV wont turn on
magnavox 32MF605W TV wont turn on pwer light goes to green and right to orange. ireplaced caps on powerboard and then replaced the board. still the same -
Re: Sylvania lc320sl1 wont turn on
i have been busy. i resoldred coils stays on now. thank you very much. i have new problem. the power button turns it on but wont turn it off but does volume and menu but the other buttoms do nothingLeave a comment:
-
Re: Sylvania lc320sl1 wont turn on
sorry i have been away. these coils are on backlight board? right they ohm out at 2.95. should i ohm them off the board?Leave a comment:
-
Re: Sylvania lc320sl1 wont turn on
got my camera working here are the photos...Leave a comment:
-
Re: Sylvania lc320sl1 wont turn on
the tv turns on when you first plug it in and will play till you turn it off .then it will not start again till you unplug it and let it sit for a day then plug it in again .when its not working i get a green power light and when i push button light goes outLeave a comment:
No activity results to display
Leave a comment: