User Profile
Collapse
-
Thanks for the suggestion. I checked the supply rails at U7700 and the NAND-related outputs.
Supplies present at U7700:- PP3V8_AON: 3.8 V
- PP1V25_S2: 1.24 V
Outputs that are missing:- PP0V88_S1: 0 V
- PP2V58_AWAKE_NAND_VCC: 0 V
- PP1V25_AWAKE_NAND_VCCQ: 0 V
- PP0V88_AWAKE_NAND_VDD: 0 V
I have not yet confirmed the enable signals for the missing outputs. Are these the correct points to check for the enable signals?...Leave a comment:
-
MacBook Air M3 stuck at 5 V after NAND replacement — missing NAND power rails
Hi everyone,
I bought a MacBook Air M3 that displayed an exclamation mark and a message with a restore address. I tried restoring it several times, but none of the attempts completed successfully.
I then replaced the NAND chips with chips from iPhone 14s. I reprogrammed them using a JCID V1S Pro and a firmware file obtained from dosdude1’s website. The programming process completed without reporting an error. I reballed the chips using a stencil and solder paste; the balls looked shiny and appeared to be in place. After soldering the NANDs back onto the board, I checked...
No activity results to display
Show More
Leave a comment: