does anyone know which parts are direly connected to the buck step down regulator ? Or could have been long term affected by the short ? And how do I measure those ? ☺️ thanks in advance...
User Profile
Collapse
-
After 2 hours of carefully removing the burnt material inside the board I was finally able to remove the short between Vin and Gnd
now it’s time to rebuild the pins.
does anyone know which parts are direly connected to the buck step down regulator ? Or could have been long term affected by the short ? And how do I measure those ? ☺️ thanks in advance...2 Photos -
MacBook Pro 16" M4 Pro_A3403_820-03396-B _ liquid damage, burnt area at LT8642-1 buck regulator, VIN shorted to GND
Hello everyone, first of all I’m very thankful that this Forum exists
could already get a lot of valuable informations here.
And it would be great if someone has some tips and ideas related to the following topic (-:
I got a liquid damaged MacBook Pro from 2024 with a burned area around the Buck regulator.
i had no prior experience in smd soldering but I am motivated to learn this skill. Already bought a rework station and a microscope. Removed the burned chip and got a replacement one.
Damage: The burnt area is next to an Analog Devices...
No activity results to display
Show More
Leave a comment: