Re: Philips Plasma
thanks for the help.
plumbcrazy
Member
Last Activity: 02-28-2013, 05:30 PM
Joined: 02-16-2013
Location: Medford Oregon
-
Re: Philips Plasma
Should I clean it up and try melting my solder a little better and then see if the tv responds.Leave a comment:
-
Re: Philips Plasma
If my flux has embedded solder and i added flux as well could i have made a problem for my self. I can see flux residue on the board around my solder. My solder looks pretty crappy compared to what is already there.Leave a comment:
-
Re: Philips Plasma
I was also told my solder probably didn't get hot enough. I should get a thinner wire with flux already in it. He thinks maybe i didn't get it hot enough to burn out the flux.Leave a comment:
-
Re: Philips Plasma
no, just that spot. isopropyl? rubbing alchol?Leave a comment:
-
Re: Philips Plasma
An electrician i know. It goes pretty deep if that makes a difference. It's hard to see.Leave a comment:
-
Re: Philips Plasma
here is some pics of the damage i was talking about. I was told because it on a main power run it wasn't repairable....Leave a comment:
-
Re: Philips Plasma
Sorry that should say d37 not d5. I found a tiny burn the size of a pencil tip in the powerboard. I'm told it's not repairable so i'm pricing them out now.Leave a comment:
-
Re: Philips Plasma
sorry should say d37 not d5. I found a tiny burn in the power board like the size of a pencil tip. I'm told it's not repairable so i'm pricing out powerboards now.Leave a comment:
-
Philips Plasma
I have a Philips plasma tv Model # 50pf7321d5 that I just replaced two bad caps. When I plugged it in and turned it on the green light at the bottom came on then flashes red four times. I noticed the power board has two green lights but the one on the right doesn't come on. I'm not sure what I should look at next any help would be appreciated. -
Philips Plasma
I have a Philips plasma tv Model # 50pf7321d5 that I just replaced two bad caps. When I plugged it in and turned it on the green light at the bottom came on then flashes red four times. I noticed the power board has two green lights but the one on the right doesn't come on. I'm not sure what I should look at next any help would be appreciated.
No activity results to display
Leave a comment: