dieseldod
New Member
Last Activity: 05-26-2015, 05:18 PM
Joined: 02-12-2013
Location: aberdeen
-
technika x22/14c tv inverter problem?
hi lads , my backlight stays on about a second then dark screen , inverter is lk-1n220413 ps is lk 1072-005c. any of you lads know what voltages to expect on input cable to inverter ?,there are no swollen caps to be seen anywhere for what thats worth . thanks in advance -
Re: samsung ps-50c96hd sound but no picture
Thanks very much Tom your the MAN. I will test that out tomorrow fingers crossed -
Re: samsung ps-50c96hd sound but no picture
The buffer looks ok. But it will. Be toast will it ? Will the 2 buffers not be toast?Leave a comment:
-
Re: samsung ps-50c96hd sound but no picture
I plugged In the new buffer board and switched it on while monitoring the rest of boards and the main board for buffer let out a puff of smoke so there's trouble there also I switched it off rapid like . What you think will be needin replaced on main board.?Leave a comment:
-
Re: samsung ps-50c96hd sound but no picture
thank you kind sirLeave a comment:
-
Re: samsung ps-50c96hd sound but no picture
havin trouble finding a service manual for this tv , i shall try to get a good close up photo posted up here thanksLeave a comment:
-
Re: samsung ps-50c96hd sound but no picture
thanks for the quick reply , most interesting . i will have to replace the low buffer board as its board is burned a bit.so you reckon i could change the low buffer ?and if that dont work i would need to find a manual and check the y main voltages. thanksLeave a comment:
-
samsung ps-50c96hd sound but no picture
hi there newbie to your forum, looks like a great site.
my tv gave up the picture today sound is ok though. i opened her up and found y lower buffer had one chip burned.do i simply order a new buffer and fit or whats best? all fuses check out on all panels , slight swelling on 2 power board caps i will change these as well. any info from you guys will be gratefully recieved, thanks in advance.
No activity results to display
Leave a comment: