Re: philips 42mf521d/37 no picture - confused.

no sound not working but dont have any devices connected, it is disassembled on my table., but no static either. not getting voltage to t-con board, have replaced mainboard twice to make sure the first one wasn't defective. i am getting 24 volts to lcd inverter boards.

hello all i have literally replaced every board in this tv and still have no picture.

im getting voltage to all boards, have replaced both lc inverter boards, power supply, t-conn board, and main board.
does antone know what the voltage should be at the fuse for the slave lcd inverter, im getting 24v to board through harness but at he fuse im reading .6v on one side and nothing on the other side. please keep in mind that all parts have been replaced and still no progress.

any help would be greatly appreciated.

hello all i have a philips flat panel lcd tv. the unit just lost display no noise or pops. i have replaced both the lcd inverter main board and slave board as well as power supply, main board (video card) and t-conn board. main board was questionable so sent it back and got replacement with new. so all parts in tv have been replaced and are new, still not picture. if the tv is plugged in and you carefully and slowly unplug the lcd main inverter board the lcd screen will flash. but no power lights come on or anything. any ideas would be greatly appreciated.

i just don't know what...