Re: I need help with my Vizio VP322
This time as I powered it up I noticed that the logo is bright white then fades. Is this a clue somewhere? New PS new SUS board working main from a pull. I am baffled anyone?
ncwookie
Member
Last Activity: 07-11-2018, 04:33 PM
Joined: 02-05-2013
Location: youngsville, nc
-
Re: I need help with my Vizio VP322
OK powered it up with a source no difference however I did noticed S1 on SUS board got hot to the touch and S3 was warm S2 was cold to the touch....Leave a comment:
-
Re: I need help with my Vizio VP322
Sorry for the long break but bills and life got in the way, finally was able to purchase new PS and still same problem. Front panel goes yellow when plugged in(standby) have my 5 volts, hit power front emblem turns white, relay clicks no sound no picture. Checked voltages again with power on all reading what they should, except I don't know what the Auto should read my reads 0.00. Anyone have any ideas? Also if I have no video source plugged in I should get the little blue box right, or should I always need a source?Leave a comment:
-
Re: I need help with my Vizio VP322
Thank you all for replying, I apologize if I was abrasive but I didn't understand why I was getting no feedback for the second time on same problem. After the no replies the first round I just started swapping out boards with fully tested ones and even purchased new YSUS board and the problem just hangs around. To give back history this TV would turn on play fine for 20-30 minutes then the screen would go blank (no picture no sound), turn it off wait 5 mins turn back on nothing black screen, but the VIZIO light on the front would...Leave a comment:
-
Re: I need help with my Vizio VP322
Is ther no one that can help with this one? I see all kinds of post with alot of suggestions but this is my second post requesting help to no availLeave a comment:
-
I need help with my Vizio VP322
I have replaced and or swapped out the main board the control board and brand new YSUS. Have also done the capacitor repair to all 9 capacitors and the 2 resistors.
Problem still exist plug in get stand by orange Visio, press power Orange Vizio goes white, no picture no sound.
Ran some voltages all within range except the 12 volt is reading 9.2 volts(red Line). Please advise new power supply or?... -
Re: VP322 Plays perfect for 30 mins then poof no screen
OK I rechecked everything in my soldering all looks good. I power it up get the standby light hit power light does turn white and I do get sound but screen is dark black, no sign of light please help. Thanks...Leave a comment:
-
Re: VP322 Plays perfect for 30 mins then poof no screen
Sorry but bumping for help.Leave a comment:
-
Re: VP322 Plays perfect for 30 mins then poof no screen
No it does not. Sorry for the delay had a heart attack Sunday night just got home from hospital. When it rains it pours....Leave a comment:
-
VP322 Plays perfect for 30 mins then poof no screen
I already replaced the caps had 3 bulgers replaced all 8 in that area. Powered up looks awesome started watching movie 30 minutes into it the screen went black. The Visio light on the front remained white until I hit the power button then it went orange. What am I missing here? I am new at this so be gentle I am no where near a pro I wouldn't even say amateur yet.
Thanks in advance
JimB -
Re: VP50HDTV10A YSUS Board Help
Is this the resistors I need?
[URL="http://www.radioshack.com/product/index.jsp?productId=12547455&filterName=Type&filterValue=5-watt+resistors"]http://www.radioshack.com/product/index.jsp?productId=12547455&filterName=Type&filterValue=5-watt+resistors[/URL]Re: VP50HDTV10A YSUS Board Help
Is this the resistors I need?
[URL="http://www.radioshack.com/product/index.jsp?productId=12547455&filterName=Type&filterValue=5-watt+resistors"]http://www.radioshack.com/product/index.jsp?Leave a comment:
-
Re: VP50HDTV10A YSUS Board Help
OK here is what I did and what I got. Grounded to mounting hole and verified by touching grnd pins. Tested on each side of both IPM's all open no shorts. But In the picture attached hopefully you can see the red circle around 5 pins those sounded off like the grnd next to them is that correct? Are my IPM's ok and I just need to replace the fuses?...Leave a comment:
-
Re: VP50HDTV10A YSUS Board Help
How would I check that if those are open. Please adviseLeave a comment:
-
VP50HDTV10A YSUS Board Help
First time poster, long time reader, and may I say I have learned a bit from you all.
But now I have an issue that I am unable to find the answer to on here so here we go.I am getting open result on R54 and R55, What are the replacement specifications for these resistors/fuses?
Thanks in advance -
Re: Need help identifying capacitor
I am not trying to highjack but I am tired of jumping through hoops and still unable to post please forgive me on this but I need some help. Unable to find the following guide me if you can.
1276 R54 0130-4702-1654 RES. CF 47Kohm 1/16W J 0402Leave a comment:
-
Re: New Members - please post your introductions here
Hello all newby hereLeave a comment:
No activity results to display
Leave a comment: