thanks...
rattfink
New Member
Last Activity: 05-08-2026, 11:36 AM
Joined: 05-05-2026
Location: Green Bay, WI
-
Ok, sounds good, it'll be a good weekend project.. thanks...
-
Visio M60-D1 BOOT LOOPING
Hello -
I have a Visio M60-D1 LCD TV and it's stuck in a boot loop (Visio Logo, restarts, Visio logo, restarts, etc....)
I have tried the obligatory unplug, let it sit for a while to let it discharge, etc... also have tried the "Volume Down + Input for 5 Seconds, then just the Input for 10 Seconds" trick, and that did not break through the loop.
One thing that I did notice as I was trying to get it to pull the firmware from a fat32 formatted USB flash drive was that when it was attempting to boot I saw the USB stick's activity light flicker for a bit and then went... -
Thanks for these, i am currently trying to troubleshoot a rail trace from the left side and trying to compare with the right side, i noticed that the pcb file isnt matching up with the pdf files for the right joycon fpc connector (specifically pin 3) do you know if im missing something? thanksLeave a comment:
No activity results to display
Leave a comment: