Re: Magnavox 37MF321D-37 problem

Most cheap, low temp high ESR caps won't work. I've got 3 of those freakin boards, and putting the wrong caps in can cause you countless other problems! You can pull that board out and test it with it plugged in, but you have to connect loads for each of the 16V, +24v and -24v. I built a test jig to put a load on all 3 supplies, and LED's to show which are putting out voltage. Most problems that can't be fixed with just replacing caps seem to be in the 4A, 24volt line theres a power MOSFET STP45NF3LL that goes bad as well as diode 6074, an 8v 1/2w...