User Profile

Collapse

Profile Sidebar

Collapse
anik0101010
anik0101010
New Member
Last Activity: 05-05-2026, 03:40 PM
Joined: 04-07-2026
Location: bagno a ripoli
  •  
  • Time
  • Show
  • Source
Clear All
new posts

  • Haha, you are absolutely right! It’s the perfect example of why the Right to Repair is so vital. It’s incredibly frustrating to have a perfectly fine piece of hardware—with a CPU that’s clearly alive and kicking—turned into a doorstop just because the manufacturer holds the OS binaries hostage.

    I’ve already done the heavy lifting: restored U-Boot via UART, wiped the corrupted NAND, and I’m literally sitting at the RCF-M18# prompt. The mixer is ready to be "reborn", but I'm missing the 50MB of data that RCF refuses to share even with independent labs.
    ...
    See more | Go to post

    Leave a comment:


  • [REQ] RCF M18 Digital Mixer - NAND Recovery files (uImage / ubi.img) or Dump

    Hi everyone,

    I'm working on a bricked RCF M18 digital mixer. The unit was completely dead, but I managed to resurrect the hardware doing a low-level recovery via the internal UART header and the Debug Jumper method (as per RCF Service Note 1903B).

    I successfully booted from the SD card, wiped the NAND, and flashed U-Boot. The CPU is alive and I now have a working serial console at the RCF-M18# prompt.

    The Problem:
    The recovery script halted because the official firmware update provided by RCF on their website (.mpk format, ~1.5MB) is just an application...
    See more | Go to post
No activity results to display
Show More
Working...