Re: Panasonic TH-58PX600U 10 blinks
Yay!!!...
wmsproul
Member
Last Activity: 08-31-2015, 09:09 AM
Joined: 01-21-2013
Location: ca
-
Re: Panasonic TH-58PX600U 10 blinks
Well i got extremely lucky. I found someone selling the exact same tv on a local Craiglist ad. Broken screen, paid $80 and brought it home. Changed power board and all is working great. Going to strip the broken tv of all the boards and toss it. Thanks for all of the help with this....Leave a comment:
-
Re: Panasonic TH-58PX600U 10 blinks
Well replaced it with a new pa and nothing changed. Still not working. Could those caps be bad? Back to the drawing board, start trouble shooting from the beginning.Leave a comment:
-
Re: Panasonic TH-58PX600U 10 blinks
New PA board is on it's way.Leave a comment:
-
Re: Panasonic TH-58PX600U 10 blinks
Should i just replace the pa board?Leave a comment:
-
Re: Panasonic TH-58PX600U 10 blinks
Removed PA connections from the P-Board, no change, 3 clicks 10 blinks.
Removed SC connections from the P-Board, no change, 3 clicks 10 blinks.
Removed SS connections from the P-Board, no reaction, no blinks or clicks.
Removed D connections from the P-Board, no reaction, no blinks or clicks.
Make sense?Leave a comment:
-
Re: Panasonic TH-58PX600U 10 blinks
Ugh. No go, even after removing the stabalizing silicone. I tried every board with an ic. Still three clicks, ten blinks.Leave a comment:
-
Re: Panasonic TH-58PX600U 10 blinks
Ok i guess i am not clear on what im looking for in the pic. I took a closer one of the area you described. Are you seeing a component/connection that could be bad?...Leave a comment:
-
Re: Panasonic TH-58PX600U 10 blinks
Here it is.....Leave a comment:
-
Re: Panasonic TH-58PX600U 10 blinks
They are not the issue apparently. I used the spray to cool the ic's but still received the 3 clicks and 10 blinks. I also tested by freezing both at the sametime and all individually. Why would i be seeing vac from the top of the caps??...Leave a comment:
-
Re: Panasonic TH-58PX600U 10 blinks
Would these be the ones? I watched the video and it obviously isnt the same power supply as mine. But these are locateed in the same location to the IC. Also the ones i need are 1uf 50v aluminum caps, right?...Leave a comment:
-
Panasonic TH-58PX600U 10 blinks
Noob here. Some electronic experience. I am working with a TH-58PX600u 10 blinker - pre power button. None of the TP's on the PA board are shorted to ground. All fuses good on the P-board. Ran through the trouble shooting guide and it seems to be coming from a faulty P-Board, it has bulging 900uf 220v caps 2 of the 3. Removed them from he board and they all meter ~854uf. I am getting around 34vac from the top of all four 220uf 450v caps on the P-board. Found that by accident. I shouldn't be seeing voltage from the top of the caps right. Any ideas?Last edited by wmsproul; 01-26-2013, 02:26 AM.
No activity results to display
Leave a comment: