Re: AOpen F2703-12S Stuck pixels after cap change



No I didn't see it before hand. It was a family members and they didn't mention any problems with it before. I will ask today and make sure though. I will try what you suggest. I had to mix brands of capacitors based on what I could find. I order them from Mouser. Here is what I used:

1x Chemi-Con 68uf 400v
1x Kemet 10uf 50v
2x Kemet 220uf 25v
2x Panasonic 470uf 25v
3x Panasonic 330uf 25v

All were bulging except for the 68uf 400v but I replaced it anyway. The...

Hello everyone. I am attempting to fix a dead LCD monitor and have ran into a problem. The LCD was dead and would not power on. I checked the power board and found 8 of the 9 capacitors bulging. I replaced all caps on the board with a different brand of cap but same ratings. Seems to have fixed the LCD as it does power on and work now, but there are many stuck pixels that show up in all four corners of the screen now. About 1/4 of an inch in all four corners shows many stuck pixels. If you turn the monitor off for a few seconds and then back on, they go away, but then quickly start reappearing....