Re: Telefunken T32R915FHD - PSU VESTEL 17PW04-1 voltages to low
thank you for the tipp , will replace 15nF 630 volts MKP capacitor C214.
nopain77
New Member
Last Activity: 05-06-2022, 10:32 AM
Joined: 01-06-2013
Location: Dresden
-
Re: Philips 50PF9631D/37 - 6 Red Blinks on Front LED
hi,
Downloaded the manual philips_50pf9631d37_chassis_bj24u_bj25u_sm.pdf
Which fuse on which board exact was blown ? (example 1U04)
the speakers should be connected, because the ssb checks the presence of it.
which resistors burnt up (example 3U25) .. ?Last edited by nopain77; 02-08-2013, 01:14 PM.Leave a comment:
-
Telefunken T32R915FHD - PSU VESTEL 17PW04-1 voltages to low
Hello everyone,
Can anybody help me ?
All Fuses OK, but Voltages to low.
12V - real 8,3V
24V - first 24V , falling down to approx. 18V if i connecting a multimeter.
- the same failure after disconnecting the T-Con and Inverter Board.
- replaced any caps on the PSU, no changes
pictures follows
Have a multimeter and no tv specific but electronic experience.
by the way: im not a native english speaker , maybe i didnt understand some phrases ...
Thank you...Last edited by nopain77; 02-08-2013, 12:25 PM. -
Re: 17pw26-4 psu
Hello,
Got the same thing on a Telefunken T40R882FHD with powersupply 17PW26-4
Error was : On (Red) and Standby LED (blue) blinking alternately.TV stuck in standby.
Replacing the D881 with another ultrafast rectifier did it.
Thanks for post it.Leave a comment:
No activity results to display
Leave a comment: