Re: Enermax Liberty ELT500AWT fails to turn on

thanks for the replies, very glad I asked. Annoyingly, the message on the board advises that the same type and rating of fuse is used, but does not appear to give details. You can make out most of it here:
[url]https://www.badcaps.net/forum/attachment.php?attachmentid=33636&d=1325773170[/url]

So, assuming it is actually 5A, I should be able to pick up a packet of spares from my local Maplin tomorrow. [url]http://www.maplin.co.uk/20mm-glass-quickblow-f-451[/url]

I've taken a couple of pictures...

Re: Enermax Liberty ELT500AWT fails to turn on

I have this same PSU, with a blown internal fuse. I think it is rated 15A 250V and appears to be one of these

I assume a glass bodied alternative will be suitable, perhaps one of these,
[url]http://uk.farnell.com/littelfuse/0217015-hxp/fuse-cartridge-15a-5-x-20mm-fast/dp/1678194[/url]

The only compromise I can see is the interrupting rating, where my replacement has a lower rating.

Is this likely to be ok and what are the chances that my power supply will spring back to life with...