Re: Phillips 42PFL5432D/37 problems
I am an idiot thank you guys very much
Jesnjonbond
Member
Last Activity: 01-21-2013, 01:18 PM
Joined: 01-01-2013
Location: Mount Olive, NC
-
Re: Phillips 42PFL5432D/37 problems
What do you mean?Leave a comment:
-
Re: Phillips 42PFL5432D/37 problems
Could I have messed up something on the power board to cause this?Leave a comment:
-
Re: Phillips 42PFL5432D/37 problems
Yes I have done this with no result. The picture is slightly checkerboard. It's only noticeable when you get close.Leave a comment:
-
Re: Phillips 42PFL5432D/37 problems
Any ideas? Anyone!Leave a comment:
-
Re: Phillips 42PFL5432D/37 problems
Ok I've replaced the bad capacitors and the tv will now come on but it is all black and white. Have I messed something up or did I forget something?
Thank you for your help so far.Leave a comment:
-
Re: Phillips 42PFL5432D/37 problems
Is this bad as well?...Leave a comment:
-
Re: Phillips 42PFL5432D/37 problems
All three are CapXon 1500uF35V and the one on the left is 2200uF16VLeave a comment:
-
Re: Phillips 42PFL5432D/37 problems
Power supply board...Leave a comment:
-
Re: Phillips 42PFL5432D/37 problems
Light does not blink it stays on and solid until I hit the power buttonLeave a comment:
-
Re: Phillips 42PFL5432D/37 problems
Button stays ***ON.Leave a comment:
-
Phillips 42PFL5432D/37 problems
I have a 42" Phillips that is constantly blinking on then off. The green power button stays in though. I've removed the back and everything on the board looks to be normal.
No activity results to display
Leave a comment: