Re: 2005 fpw still dead after cap change

Well - it looked like discoloration of the glue attaching the clear insulator to the bottom of the pcb. The transformer top side looks good.
The bigger transformer was what I was concerned with. The monitor never lights up.
Guess I will have to test it per the link you sent, thanks.

Re: 2005 fpw still dead after cap change

You asked for pics. You got em.
Let me know if you see anything....

Re: 2005 fpw still dead after cap change

I can post pics, but I am not sure what you expect to see.
I only have a top view of the board right now - I put the monitor back together and discovered the caps didn't fix the problem and I didn't take it apart again.

There is a PT20106 that looks like it may have overheated. I can't really tell if the varnish they used for the windings melted or it was manufactured like that (the process isn't exact for transformers so there may be slight excess during mfg).
Second, it looks like one of the small transformers...

Re: 2005 fpw still dead after cap change

not sure about the make of the replacements. I think the logic board replacements I bought were panasonic.
The others are gold on black. I think they are good caps.

Re: 2005 fpw still dead after cap change

power board cap replacement plus 2 on the 'logic' board.

Any ideas? It blinks initially but stays black.
Replaced all the caps.
There is a transformer in the high voltage section that is suspect. However, the number PT20106 has got me stumped. Can't find that on the net.
Any suggestions?